Wi-Fi security do's and don'ts

Wi-Fi is inherently susceptible to hacking and eavesdropping, but it can be secure if you use the right security measures. Unfortunately, the Web is full of outdated advice and myths. But here are some do's and don'ts of Wi-Fi security, addressing some of these myths.

Watch a slideshow version of this story.

WiFi users blissfully ignorant about real security

1. Don't use WEP

WEP (wired equivalent privacy) security is long dead. Its underlying encryption can be broken quickly and easily by the most inexperienced of hackers. Thus you shouldn't use WEP at all. If you are, immediately upgrade to WPA2 (Wi-Fi protected access) with 802.1X authentication — 802.11i. If you have legacy clients or access points that don't support WPA2, try firmware upgrades or simply replace the equipment.

2. Don't use WPA/WPA2-PSK

The pre-shared key (PSK) mode of WPA and WPA2 security isn't secure for business or enterprise environments. When using this mode, the same pre-shared key must be entered into each client. Thus the PSK would need to be changed each time an employee leaves and when a client is lost or stolen — unpractical for most environments.

3. Do implement 802.11i

The EAP (extensible authentication protocol) mode of WPA and WPA2 security uses 802.1X authentication instead of PSKs, providing the ability to offer each user or client their own login credentials: username and password and/or a digital certificate.

The actual encryption keys are regularly changed and exchanged silently in the background. Thus to change or revoke user access all you have to do is modify the login credentials on a central server, rather than having change the PSK on each client. The unique per-session keys also prevent users from eavesdropping on each other's traffic — which is now easy with tools like the Firefox add-on Firesheep and the Android app DroidSheep.

Keep in mind, for the best security possible you should use WPA2 with 802.1X, also known as 802.11i.

To enable the 802.1X authentication, you need to have a RADIUS/AAA server. If you're running Windows Server 2008 and later, consider using the Network Policy Server (NPS), or the Internet Authenticate Service (IAS) of earlier server versions. If you aren't running a Windows Server, consider the open source FreeRADIUS server.

You can push the 802.1X settings to domain-joined clients via Group Policy if you're running Windows Server 2008 R2 or later. Otherwise, you may consider a third-party solution to help configure the clients.

4. Do secure 802.1X client settings

The EAP mode of WPA/WPA2 is still vulnerable to man-in-the-middle attacks. However, you can help prevent these attacks by securing the EAP settings of the client. For instance, in the EAP settings of Windows you can enable server certificate validation by selecting the CA certificate, specify the server address, and disable it from prompting users to trust new servers or CA certificates.

You can also push these 802.1X settings to domain-joined clients via Group Policy or use a third-party solution, such as Avenda's Quick1X.

5. Do use a wireless intrusion prevention system

There's more to Wi-Fi security than combating those directly trying to gain access to the network. For instance, hackers could setup rogue access points or perform denial-of-service attacks. To help detect and combat these, you should implement a wireless intrusion prevention system (WIPS). The design and approaches of WIPSs vary among vendors, but generally they monitor the airwaves looking for, alerting you to, and possibly stopping rogue access points or malicious activity.

There are many commercial vendors offering WIPS solutions, such as AirMagnet and AirTight Neworks. There are also open source options, such as Snort.

6. Do deploy NAP or NAC

In addition to 802.11i and a WIPS, you should consider deploying a Network Access Protection (NAP) or network access control (NAC) solution. These can provide additional control over network access, based on client identity and compliance with defined policies. They can also include functionality to isolate problematic clients and remediation to get clients back within compliance.

Some NAC solutions may also include network intrusion prevention and detection functionality, but you'd want to make sure it also specifically provides wireless protection.

If you're running Windows Server 2008 or later and Windows Vista or later for the clients, you can use Microsoft's NAP functionality. Otherwise, you may consider third-party solutions, such as the open source PacketFence.

7. Don't trust hidden SSIDs

One myth of wireless security is that disabling the SSID broadcasting of access points will hide your network, or at least the SSID, making it harder for hackers. However, this only removes the SSID from the access point beacons. It's still contained in the 802.11 association request, and in certain instances, the probe request and response packets as well. Thus an eavesdropper can discover a "hidden" SSID fairly quickly — especially on a busy network — with a legitimate wireless analyzer.

Some might argue disabling SSID broadcasting still provides another layer of security, but also remember it can have a negative impact on the network configuration and performance. You'd have to manually input the SSID into clients, further complicating client configuration. It would also cause an increase in probe request and response packets, decreasing available bandwidth.

8. Don't trust MAC address filtering

Another myth of wireless security is that enabling MAC address filtering adds another layer of security, controlling which clients can connect to the network. This has some truth, but remember that it's very easy for eavesdroppers to monitor the network for authorized MAC addresses and then change their computer's media access control (MAC)  address.

Thus you shouldn't implement MAC filtering thinking it will do much for security, but maybe as a way to loosely control which computers and devices end-users bring onto the network. But also consider the management nightmare you might face to keep the MAC list up-to-date.

9. Do limit SSIDs users can connect to

Many network administrators overlook one simple but potentially dangerous security risk: users knowingly or unknowingly connecting to a neighboring or unauthorized wireless network, opening up their computer to possible intrusion. However, filtering the SSIDs is one way to help prevent this. In Windows Vista and later, for example, you can use the netsh wlan commands to add filters to those SSIDs users can see and connect to. For desktops, you could deny all SSIDs except those of your wireless network. For laptops, you could just deny the SSIDs of neighboring networks, enabling them to still connect to hotspots and their home network.

10. Do physically secure network components

Remember, computer security isn't just about the latest technology and encryption. Physically securing your network components can be just as important. Make sure access points are placed out of reach, such as above a false ceiling or even consider mounting access points in a secure location and then run an antenna to an optimum spot. If not secured, someone could easily come by and reset an access point to factory defaults to open access.

11. Don't forget about protecting mobile clients

Your Wi-Fi security concerns shouldn't stop at your network. Users with smartphones, laptops and tablets may be protected onsite, but what about when they connect to Wi-Fi hotspots or to their wireless router at home? You should try to ensure their other Wi-Fi connections are secure as well, to prevent intrusions and eavesdropping.

Unfortunately, it isn't easy to ensure outside Wi-Fi connections are secure. It takes a combination of providing and recommending solutions and educating users on the Wi-Fi security risks and prevention measures.

First, all laptops and netbooks should have a personal firewall (such as Windows Firewall) active to prevent intrusions. You can enforce this via Group Policy if running a Windows Server or use a solution such as Windows Intune to manage non-domain computers.

Next, you need to make sure the user's Internet traffic is encrypted from local eavesdroppers while on other networks by providing VPN access to your network. If you don't want to use in-house VPN for this, consider outsourced services such as Hotspot Shield or Witopia. For iOS (iPhone, iPad, and iPod Touch) and Android devices, you can use their native VPN client. However, for BlackBerry and Windows Phone 7 devices, you must have a messaging server setup and configured with the device in order to use their VPN client.

You should also make sure any of your Internet-exposed services are secured, just in case the user doesn't use the VPN while on a public or untrusted networks. For instance, If you offer email access (client or web-based) outside of your LAN, WAN or VPN, ensure you use SSL encryption to prevent any local eavesdroppers at the untrusted network from capturing the user's login credentials or messages.

Geier is a freelance tech writer — become a Twitter follower to keep up with his writings. He's also the founder of NoWiresSecurity, which helps businesses easily protect their Wi-Fi network with Enterprise (802.1X) security.

Read more about wide area network in Network World's Wide Area Network section.

Join the newsletter!

Or

Sign up to gain exclusive access to email subscriptions, event invitations, competitions, giveaways, and much more.

Membership is free, and your security and privacy remain protected. View our privacy policy before signing up.

Error: Please check your email address.

Tags wirelessNetworkingWi-Fi SecurityWiFi security

More about AirMagnetAppleBlackBerryCA TechnologiesGoogleIEEEIntrusionIPSLANMicrosoftSK

Show Comments
[]